Brook Hansen Motors & Spare Parts
PPU (Premium Power Units Ltd) are and authorised distributor of Brook Hansen electric motors, and are also Scotland’s only Brook Crompton Approved Motors & Drive Centre.
We hold a large range of Brook Hansen motors in stock, and have the expertise to carry out modifications for any application. Up to 400kw are available for same day delivery in Scotland, and super-fast deliverty throughout the UK, Europe & World Wide.
Contact us with your requirements.
Brook Crompton W Series Motors – Aluminium
Frame sizes: 63 to 180
Output: 0.07kW to 22kW
The Brook Crompton W Series aluminium range covers products with outputs from as little as 0.07kW to 22kW in frame sizes WU-DA63S to WU-DA180L, in either 2,4,6 or 8 pole speeds.
They are widely used in a diverse range of applications from food and drink to water and sewage. From heating and ventilation to refrigeration.
Some of the benefits of aluminium over cast iron include high resistance to corrosion and atmospheric attack (except chlorine, salt-laden or sulphuric acid) and the fact that aluminium is approximately one third the weight of cast iron.
Brook Crompton W Series Motors – Cast Iron Motors
Construction: Cast Iron
Frame sizes: 80 to 355
Output: 0.75kW to 400kW
The W cast iron Brook Crompton motor range covers products with outputs from as little as 0.75kW to 400kW in frame sizes 80 to 355L.
They are suitable for use within a diverse range of applications from food and drink to china clay production. From roller table drives to refrigeration.
Many applications often have adverse operating conditions, including repeated starting and occasional overloading; the W cast iron range is well suited to these situations. A virtual go anywhere motor, this cast iron range has a full 3-year guarantee.
Brook Crompton Series 10 Motors – Aluminium & Cast Iron
Construction: Aluminium or Cast Iron
Frame sizes: 56 to 450
Output: 0.09kW to 900kW
A high quality industrial standard range of electric motors with a Brook Crompton specification suitable for most industrial applications.
The aluminium electric motors have outputs from 0.09kW to 18.5kW in frame sizes B-DA56 to A-DA160.
The cast iron range of Brook Crompton motors have outputs from 0.09kW to 900kW in frame sizes B-DF71M to BU-DF450, in either 2,4,6 or 8 pole speed.
Brook Crompton Single Phase Motors
71 to 90 (Capacitor Start / Induction Run)
71 to 100L (Capacitor Start / Capacitor Run)
63 to 90L (Permanent Capacitor)
0.12kW to 1.5kW (Capacitor Start / Induction Run)
0.18kW to 3.0kW (Capacitor Start / Capacitor Run)
0.09kW to 2.2kW (Permanent Capacitor)
Brook Crompton Single Phase Motors are used primarily in small workshops and farms with a domestic supply.
Some industrial equipment are specifically for use with a single phase electricity supply, such as fans, blowers, centrifugal pumps and high pressure washers.
Dependent on the application we are able to offer different types of single phase motors.
Brook Crompton Drip Proof IP23 Motors
Construction: Cast Iron
Frame sizes: 160 to 315
Output: 11kw to 400kw
Brook Crompton Drip Proof squirrel cage induction motors are designed, manufactured and tested to meet or exceed the latest international standards and are suitable for all general applications where the use of open machines (IP23) is acceptable.
Open ventilated Drip Proof IP23 IC01 cooling method with an ambient temperature range of -10°C to 40°C at altitudes up to 1000m above sea level without derating, these motors offer as cost effective solution where the frame size is often smaller than a conventional IP54/55 rated motor.
Brook Hansen Hazardous Area Motors
parts & spares
Rewinds, Repairs & Overhauls
How can we help?
PPU (Premium Power Units Ltd)
Block 10, Unit 4,